Products

24” crosscut 3” depth of cut 3 HP MDF table top E-Stop Carriage rides on 4 tight-tolerance, horizontally mounted convex bearings Arbor nut and pre...

3 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460 or 575 volt motor 17 ¼” crosscut 3 ¼” depth of cut Manual Clamping Integrated ...

3 HP 1 phase TEFC (totally enclosed fan cooled) motor 208 or 230 volt motor 17 ¼” crosscut 3 ¼” depth of cut Manual Clamping Integrated Dust Colle...

3 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460 or 575 volt motor 17 ¼” crosscut 3 ¼” depth of cut Manual Clamping Integrated ...

3 HP 1 phase TEFC (totally enclosed fan cooled) motor 208 or 230 volt motor 17 ¼” crosscut 3 ¼” depth of cut Manual Clamping Integrated Dust Colle...

7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor 50/60 HZ 208, 230, 460 or 575 volt motor 64” crosscut 5” depth of cut Automatic Electro-M...

7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor with single phase input VFD (variable frequency drive) 60 HZ 208 or 230 volt motor 64” cr...

5″ depth of cut Carriage return spring Adjustable cross cut stop E-Stop Oversized MDF table top Automatic blade braking system Carriage rides on 8...

5 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460 or 575 volt motor 18” crosscut 4 ¼” depth of cut Manual Clamping Integrated Du...

5 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460, or 575 volt motor 18” crosscut 4 ¼” depth of cut Manual Clamping Integrated D...

4 ⅜ ” depth of cut Carriage return spring Adjustable crosscut stop Base column lock E-Stop Oversized MDF table top with aluminum T-slots Automatic...

7.5 hp 3 phase TEFC (totally enclosed, fan cooled) motor 50/60 HZ 208, 230, 460 or 575 volt motor 62” crosscut 7” depth of cut Automatic Electro-M...

7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460 or 575 volt motor 18” crosscut 6 ⅜” depth of cut Manual Clamping Integrated ...

7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460 or 575 volt motor 18” crosscut 6 ⅜” depth of cut Manual Clamping Integra...

7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 208, 230, 460 or 575 volt motor 18” crosscut 6 ⅜ ” depth of cut Manual Clamping Integrated...

7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 50/60 HZ 6 ¼ ” depth of cut Carriage return spring Adjustable crosscut stop Base column lo...

7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor 50/60 HZ 208, 230, 460 or 575 volt motor 60” crosscut 8” depth of cut Automatic Electroni...

7.5 HP 3 phase TEFC (totally enclosed fan cooled) motor 50/60 HZ 8” depth of cut Automatic blade braking system through Variable Frequency Drive (...

1.75 HP table saw, Table saw with 50in Fence, Table saw with riving knife Accu-Fence® locks to rail without play for increased safety and precisio...

  The BS-127P portable metal cutting band saw runs on 110-volt power. You can use it almost anywhere. We designed this manual, variable-speed mode...

2 hp motor runs on 240-volt single-phase power, so any shop can reap the benefits of this saw 9.75” round maximum capacity at 90° Standard 1” blade...

18in pneumatic Cut-off saw Cut capacity 2x12 up to 4x10. Fast cycle 45 stokes per minute. dual button control 10hp motor 230v 3ph. Low hours of use...

Cantek C12RSH Straight Line Glue Joint Ripsaw is a single-blade ripsaw 10-12in saw blade,1in arbor, feed speeds 50-120 FPM,  15hp motor 230/460v 3p...

Cutting capacity (thickness x width) 2” x 12”, 3” x 11”, 4” x 10”Cycle speed 45 strokes/minCycle operation Air 9.8CFM/70-85 psiSaw blade size 18"Sa...